CNC machining, 5-axis machining, rapid prototyping, and surface finishing for metal and plastic parts.
— BOLE Precision Sheet Metal Fabrication Solutions Welding distortion is a common challenge in the production of sheet-metal assemblies such as enclosures, frames, and equipment housings. It directly affects dimensional accuracy, assembly fit, and appearance. Drawing on practical manufacturing experience, BOLE Precision Machining explains the causes and typical forms of welding distortion and shares practical
For clear anodized CNC parts, agree appearance using identified surfaces, controlled reference samples and defined viewing conditions before production. “Clear” does not mean that every alloy, surface preparation or geometry will look identical. Separate functional finish requirements from cosmetic acceptance, and ask the supplier to review both against the actual drawing and material. Send quantity,
Custom CNC threaded tubes should be purchased from a controlled drawing that defines both the threaded interface and the hollow section. A thread that assembles successfully does not, by itself, establish bore size, wall condition or the geometry required elsewhere on the part. Send the mating-part details, material, quantity, finishing requirement and inspection expectations with
When sourcing SUS 303 CNC parts with a passivation requirement, connect the material designation, machining drawing and finishing acceptance plan before choosing a factory. Passivation is not a substitute for selecting a suitable alloy for the service environment, and a bright surface is not proof of successful treatment. Provide the intended exposure, required specification, quantity
